rechargeable 9v batteries is one of the most widely used environmentally friendly green batteries in electronic products. It has the characteristics of large single capacity, high versatility, stable discharge characteristics and low heat generation.
The nominal voltage of nickel-metal hydride battery is 1.2V, which can reach 1.35V when fully charged. It is close to the voltage of ordinary AA alkaline battery. It can basically be used universally. The discharge characteristics of rechargeable 9v batteries are better, and the discharge curve is also very good. Smooth, when the power is almost exhausted, the voltage will suddenly drop, which is similar to the nickel-chromium battery, but the instantaneous discharge current is not comparable to the nickel-chromium battery. In addition, nickel-hydrogen batteries use a mercury-free design, which is of great significance to environmental protection.
1. Material: Ni-plate steel
2. Maximum Charge Voltage 10.5V
3. Discharge Cut-off Voltage 7.0V
4. Standard Charge Current: 0.1C Time:15-16(H)
5. Rapid Charge Current: 0.5C Time:2-3(H)
6. Storage Temperature : Discharge:-20°C -60°C ; Less than 3 months: -20°C~ 45°C ; Less
than 1 year:-20°C~25 °C
7. Protect Performance: Contain PTC heat-fuse
Battery Store Condition and Attention:
1.Battery should be stored in dry and cool condition.
2.The stored battery should be recharged at one time at least every three months.
3.The battery should be lay aside in open circuit state,take the battery off if it don’t use,
to avoid battery destroy by too long time over discharge.
Battery Charging Instruction:
1.Put battery into machine or take the battery off the machine should be in power off state.
2.Please use mated Nimh/Nicd battery charger,unmated charger may not work,or can not full
charge the battery and destroy the battery
3.The full charged battery need to be taken off the charger,to avoid life shorten by
over charge,reduce batter performance.
OEM orders welcomed,customized will be available