1.This nimh battery Charger can only charge a cylindrical lithium-ion batteries and nickel-metal hydride
batteries, non-rechargeable lithium iron phosphate battery;
2. Before use, please carefully refer to the instructions, pay attention to the recommendation
of the rechargeable battery charging current, do not exceed the recommended charging current;
3. Do not use other power adapter;
4. Chargers discharge may be hot, be careful not to burn;
5. Stop use, unplug the power, removing the battery;
6. it can only be used in normal room.
7. This product test data for reference only, please refer professional equipment.
1.4 kinds of charging current regulator (300mA / 500mA / 700mA / 1000mA);
2. Can different specifications (18650/26650 ...... / AA / AAA) in the battery charger;
3. The charger preclude the use of a separate screen LCD display, voltage (V) Current (mA)
Time (h) Capacity (mAh) resistance (mR) parameters, E glance...;
Under 4. CHARGE mode, 4 channel work independently, you can select different charging current for
charging and Hunchong lithium-ion batteries and nickel-metal hydride batteries.
Under 5. FAST TEST mode, 4 channels can quickly detect the battery capacity, regardless of the
lithium-ion batteries and nickel-hydrogen batteries, are working independently. Rapid detection
of battery capacity process (1 discharge, 2 full) by the two step
6. NOR TEST mode, the battery capacity is normally detected by the three step process (1 first
charged, then discharged 2 and 3 refill), the detection process of the battery capacity;
7.CHARGE and FAST TEST / NOR TEST 3 modes can work simultaneously; independent set charge /
fast capacity detection / normal capacity detection;
8. A variety of protection functions: overcharge and over discharge, short circuit, temperature,
0V voltage activation function, (- ΔV & 0ΔV), 1.65V-2.2V can not be charged, intelligent
recognition bad battery and reverse-battery detection protection.
9. with standard 5V / 1000 mA USB output: from 1 to 4 lithium batteries lithium batteries USB
output is completed, the product can not be nickel-metal hydride battery with USB output.
10. with a dedicated power adapter: DC Input voltage: 12V / 2A.
1.The charger has six buttons, mode selection key (MODE), the current selection key (CURREN),
and view the data independently selected key (1234), the use of simple and convenient;
2. Hold down the MODE key in any case and held for 3 seconds to change the CHARGE (charge) mode
or FAST TEST, NOR TEST (capacity test) mode, then tap again corresponding to the function keys
can be changed within 8 seconds, to current, independent, Hunchong, capacity test, the selected
function after 8 seconds into the working state, in working condition can tap the (1234) key
to view the current (mA) / capacity (mAh) / voltage (V) / time ( h) / resistance (mr) data
CHARGE (charging mode)
1.When the power is turned charger, the charger all instant full brightness LCD screen, if the
battery is not placed in the display Null, if it is a bad battery will also be displayed
into the Null;
2. Insert the batteries power charger, the charger in three seconds or so to measure the internal
resistance of the battery, after which the system automatically enters charge mode (CHARGE), the
charger automatically default charging current is "500mA, in 8 seconds within the current
selection by key (CURREN) select 300mA, 500mA, 700mA, 1000mA current charging system lock current
that you select will be charged in eight seconds, if within 8 seconds, did not make the set,
then the system automatically defaults to 500mA charging current, current and other functions at
this time will not be changed, if necessary change, need to change the mode button press from the
3. In the charge mode (CHARGE), within 8 seconds to change any of independent charging or
different current selection, as well as different battery Hunchong. make a simple, 8 seconds tap
the corresponding button battery 1234, press mode button to change the mode, press the current
key to changing the current, independent, Hunchong, capacity detection function, selected after 8
seconds into the working state, attention according to the battery capacity size to select the
charge current, if not fast charge, we recommend charging 500mA, this is the safest;
4. charging mode, by tapping the keys you can switch to view the 1234 charge capacity (mAh) /
charging time (h) / battery internal resistance (mR) / charging current (mA), voltage (V) 5 kinds
of units, the battery is fully charged After the show, (end of charge).
lii-500 18650/26650 charger
1 X 12V 2A adapte(USA/EU)
1x car charger